HPE Community
MSA Storage
1753781 Members
7720 Online
108799 Solutions
New Discussion

Re: No throughput/activity on StorageWorks FC switch

 
SOLVED
Go to solution
EildonHA
Advisor

‎04-04-2013 08:06 AM

‎04-04-2013 08:06 AM

Re: No throughput/activity on StorageWorks FC switch

The LUNS are mapped to each of the ESX Hosts HBAs..... I can't see the HBA's for the Controllers mapped to the LUNs? Should they be in there?

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎04-04-2013 08:10 AM

‎04-04-2013 08:10 AM

Re: No throughput/activity on StorageWorks FC switch

I can't see what you see in front of you ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
EildonHA
Advisor

‎04-04-2013 08:49 AM

‎04-04-2013 08:49 AM

Re: No throughput/activity on StorageWorks FC switch

OK let's try again :( .....

0 Kudos
Reply
EildonHA
Advisor

‎04-04-2013 08:50 AM

‎04-04-2013 08:50 AM

Re: No throughput/activity on StorageWorks FC switch

Worked! Good ol Mozilla. IE10 grrrrrr..

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎04-04-2013 11:29 AM

‎04-04-2013 11:29 AM

Re: No throughput/activity on StorageWorks FC switch

Looks like vc1 slot 1 and 2 are not mapped.
Which is the server in question?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
EildonHA
Advisor

‎04-05-2013 01:36 AM

‎04-05-2013 01:36 AM

Re: No throughput/activity on StorageWorks FC switch

Hi - Yes VC1 isn't mapped this is the Virtual Center Server

0 Kudos
Reply
EildonHA
Advisor

‎04-08-2013 05:11 AM

‎04-08-2013 05:11 AM

Re: No throughput/activity on StorageWorks FC switch

...so now that you can see the ESX Hosts are fully mapped, any ideas why I am seeing no activity on one of the active controllers HBA's??

 

Thanks

Steve

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.