MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

P2000 G3 4 ports link speed

 
SOLVED
Go to solution
EildonHA
Advisor

P2000 G3 4 ports link speed

In the process of deciding whether to go for iSCSI storage connectivity or stick with FC.

 

Been looking at the P2000 G3 and the 1Gb iSCSI model, which has 4 ports per controller.

 

Would be looking to do link aggregation from switch to each device in SAN (3xESX Hosts, each MSA controller etc)

 

Question. If I set up link aggregation on the switch on 4 of its ports and connect those ports to the 4 ports on 1 of the controllers, will the MSA do aggregation over those links and give me the cumulative 4Gb??

6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: P2000 G3 4 ports link speed

If you compare, compare the 10GbE iSCSI and 8Gb FC ports too, the MSA2040/1040 even has 16Gb FC ports!.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
EildonHA
Advisor

Re: P2000 G3 4 ports link speed

Torsten - thanks for reply. Yes, I have been looking at the FC model and both the 1Gb and 10GbE iSCSI models, although acquiring compatible switching for the 10GBe iSCSI is going to price us out of that option.

 

We currently have a 4Gb FC backbone but the equipment is over 5 years old and looking to replace.

 

Really just trying to get an idea whether going to a 1Gb ethernet solution, with aggregated links to hosts/storage would result in lesser performance than the dedicated 4Gb we are used to.

EildonHA
Advisor

Re: P2000 G3 4 ports link speed

I am reading that iSCSI/SAN solutions do not support LACP so no need for anyone to answer that question!

 

Thanks anyway!

Torsten.
Acclaimed Contributor

Re: P2000 G3 4 ports link speed

Don't mix up with server protocols - the array supports multipathing, so it combines the bandwith of the ports too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
EildonHA
Advisor

Re: P2000 G3 4 ports link speed

Can I ask (what might be a dumb) question please.

 

With respect to MPIO, does the MSA do this automatically or does it need to be enabled? I know that you need to configure it on your hosts.

 

Also, I'm assuming multipathing is available on FC MSA too?