MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

P2000 G3 Connected to itself

 
SOLVED
Go to solution
Tolli
Occasional Visitor

P2000 G3 Connected to itself

 

Hello forum

 

I am setting up a new Hyper-V cluster for a customer. He already has two P2000 G3s, but he claims he is only using one of them. The plan is to use the other P2000 for the new cluster.

 

However, when I look at "Hosts Overview" in the Web UI, I can see that it is connected to itself (it has its own iqn address listed under hosts).

 

I don't understand why it would be configured like that, and I am afraid to break something if I remove it.

 

I don't have much experience with the P2000 and I will be very grateful to anyone that can enlighten me and help me understand this setup.

 

 

Thanks in advance.

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: P2000 G3 Connected to itself

Controller A can see controller B and vice versa. Don't worry, you can't remove it anyway.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tolli
Occasional Visitor
Solution

Re: P2000 G3 Connected to itself

Thanks for your reply.

 

The host mappings disappeared after I installed the latest firmware bundle. Now I feel confident that the SAN is really not in use.