P2000 G3 MSA Performance

[Steve_Gould]

Hello,

I have a Hyper-V 2012 cluster which points at LUNs based on a P2000 G3 for the virtual servers. My users are complaining about speed issues and one thing that has been flagged is latency in the read/write speed. I spoke to HPE who checked my P2000 SAN for hardware faults and found nothing, However, to me the performance data over the last four days looks to be spiking. I don't have anything to compare my charts to as a baseline was never taken.

I'm wondering if I get opinions on the performance charts and whether the performance data shows significant latency that would be causing/contributing to my issues. I have two disk arrays in the P2000, one allocated to each controller. Performance data from each is attached.

Many thanks,

Steve