cancel
Showing results for 
Search instead for 
Did you mean: 

P2000 G3 iSCSI

 
Paul11
Occasional Visitor

P2000 G3 iSCSI

I have a failed drive that have been replaced.

The current status of the drive is "AVAIL"

I wanted to add it as a dedicated spare to my VDISK running RAID10

If I do this will I loose the data on the VDISK?

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: P2000 G3 iSCSI

The status AVAIL is normal for a new disk. Now select the vdisk and make it a dedicated spare.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul11
Occasional Visitor

Re: P2000 G3 iSCSI

Will I loose data on that vdisk?

Torsten.
Acclaimed Contributor

Re: P2000 G3 iSCSI

No. Why should you loose data when adding a spare?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!