P2000 G3 vDisk Scrub

[jdixon]

I'm getting some errors after a power outage:

Code: 21

Vdisk verification failed. Command failed. (error code: 1) 4 error(s) were found.

How do I correct this? I see something about performing a vdisk scrub. I'm assuming that is right clicking the vDisk and selecting Media Scrub Utility?

[BhavnishK]

Hi,

Vdisk scrub is the backgroup utility which checks the health of your vdisk and if there are any errors like media error on disks.

So if scrubing is getting failed then check in the event logs, there must be some other errors pointing towards any particular disk or slot.

Checking around the scrub failed error will tell why it is happening.

BK