MSA Storage

P2000 coad load failure after firmwarer upgraded

 
jomwc
New Member

P2000 coad load failure after firmwarer upgraded

i Just updated firmware of P2000 but i got failure as below

Code load failure
starting message server
STATUS : Code Load Failure

the application is not able to communicate with the
storage controller. Verify the storage controller on this
FRU is operating correctly, then retry your request.

This management controller will now reboot.

appsv down

1 REPLY 1
giladzzz
Honored Contributor

Re: P2000 coad load failure after firmwarer upgraded

Hi

If you did the upgrade from the smart component it need to have access

to both controllers check if you can ping both controllers.

Regards