MSA Storage
1748057 Members
5290 Online
108758 Solutions
New Discussion юеВ

Re: Problem at EVA 8000

 
SOLVED
Go to solution
shafeygado
Occasional Advisor

Problem at EVA 8000

Dear All

 

I have EVA8000 
I have 3 HD defective at one group ( but my data still ok )

My Question:
I found my storage Capacity 
Total             110148.84 GB
Used             128147.51 GB 
Available       not available

 

I could not understand how come used over than total

And what is your recommendations

 

Regards

5 REPLIES 5
hvhari
Esteemed Contributor
Solution

Re: Problem at EVA 8000

You are lucky to have the data intact even after 3 disks failing. Please arrange to replace the failed disks quickly.

 

One reason could be that the "failure protection level" data being used up now due to the failure of disks. Please take steps to replace the defective disks and if this discrepancy continues even after that, you shall reset the command view service/server. Some times commandivew eva reports incorrect values related to disk usage.

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Johan Guldmyr
Honored Contributor

Re: Problem at EVA 8000

If it is a CV / XCS issue I've seen it a lot less with CV over 9.3 and XCS over 6.200.

shafeygado
Occasional Advisor

Re: Problem at EVA 8000

 

Dear  Guys 

 

Many thanks for help 

 

 

shafeygado
Occasional Advisor

Re: Problem at EVA 8000

 

What is the maximum faild HD 

Torsten.
Acclaimed Contributor

Re: Problem at EVA 8000

In an "ideal" case 50% - but this is just theory!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!