MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem between Storagetek d220 and EVA4000

 
Dany Eemans
Occasional Visitor

Problem between Storagetek d220 and EVA4000

Im installing a new eva4000 and i need to connect them to a server (WIN2003 sP1). On this server are already drives definded from a storagetek d220. When is install multhipath for EVA4000 the server is stalled. reboot to last know good configuration is the only sollution. Anybody any idees.

Thanks in advance
1 REPLY 1
Highlighted
Uwe Zessin
Honored Contributor

Re: Problem between Storagetek d220 and EVA4000

Does the server already have a multipath solution for the D220 installed? If yes, it sounds like those are not compatible.

If you intend to migrate all data from the D220 to the EVA4000 and don't need access to the D220 after that, you can temporarily set up you switch environment to provide access to a single EVA port only via zoning.
.