MSA Storage
1748140 Members
3641 Online
108758 Solutions
New Discussion

Problem getting iscsi to work on P2000

 
Ramon76
Occasional Contributor

Problem getting iscsi to work on P2000

Hi,

 

We have got two hp proliant servers dl380 g6 with each 2 10GB connections.

 

The i'p's are configured are (have a look at the attachment:

Host 1:

NIC SAN1: 192.168.201.1

NIC SAN2: 192.168.202.1

Host 2:

NIC SAN1: 192.168.203.1
NIC SAN2: 192.168.204.1

Host interfaces on the P2000 are:
A1: 192.168.201.20
A2: 192.168.203.20
B1: 192.168.204.20
B2: 192.168.202.20

The cables are connected to the correct NIC from the host to the SAN. I can ping from the host to the san interface without a problem. I i use the iscsi interface to connect to A1 or B1 than the connection is made immediately. But if i try to connect to A2 or B2 it takes forever before the connection is made. Errors in the eventlog are:

"Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data."

I also switched cables. But still the same result.

What am i doing wrong? Is my IP Configuration OK?

 

Thx.

 

Ramon