HPE Community
MSA Storage
1753454 Members
6507 Online
108794 Solutions
New Discussion

Problem with booting BL25 from SAN

 
CA1319835
New Member

‎08-31-2005 06:36 PM

‎08-31-2005 06:36 PM

Problem with booting BL25 from SAN

Hello.
I have a problem with booting from SAN using the second port of my dualport Qlogic adapter in HP BL25 Blade Server.
I have EMC 300cx and HP StorageWorks SAN Switch 2/16V
When I enable BIOS on my first port of HBA - all goes well, but when i disable it on the first one and enable on the second port - my server hangs on boot during POST after scanning HBA's. (See attachment) I did not install OS - so it is not the OS problem.
I tried zoning only second port of HBA and one port in EMC 300cx - did not help.
I do all settings like it described in "HP Booting Windows Server 2003 from SAN" manual.
Thanks for help if any.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.