MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems launching Sansurfer Express

 
Highlighted
Garch
Occasional Visitor

Problems launching Sansurfer Express

I have two DL380 G5's with 2 HBA's each, connecting into an MSA 1000, redundant fibre switches, active/active controllers etc.

After putting on the HP MPIO software, I now can't launch Sansurfer - on either machine. It gets to the splash screen and then dies.

I get 3 eventvwr messages saying:
QLogic SANsurfer VDS App Error:IVdsLunMpio GetSupportedLbPolicies Error:- interface is not supported!

then i get a faulting application QLogicVDSApp.exe version 1.0.0.1 faulting module unknown error.

Everything otherwise seems to be working fine, although I have been confused in general with the general lack of documentation..

If anyone has come across this before and could help I would very grateful.

Thanks,
Michael
1 REPLY 1
John Gilbert_6
Occasional Visitor

Re: Problems launching Sansurfer Express

Two things I would check:

One - which MPIO software did you install since there are a few flavours? What was on before, if any?

Two - Does SANSurfer Express support two HBAs? Does it work if you pull the cable on one of the servers?