MSA Storage
1753770 Members
5088 Online
108799 Solutions
New Discussion

Re: Product Number on SN6000 FC

 
az9744
Occasional Visitor

Product Number on SN6000 FC

Hi there,

 

I am trying to get a warranty status on our SAN switches but when i check this , i get back an error saying product number required. The problem is i'm not able to get to the them physically as i only have remote access to the switch.

Is there a way of finding these through SSH?

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Product Number on SN6000 FC

Not sure if this works for your system, but you can try to type the serialno at http://partsurfer.hpe.com


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
az9744
Occasional Visitor

Re: Product Number on SN6000 FC

Thanks for this.

I did see you post this in another topic and i did try it but it doesnt recognise it.

Im going to see what support has to say.

 

Torsten.
Acclaimed Contributor

Re: Product Number on SN6000 FC

It works for servers and many other devices. Not sure if it works for the switches too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!