MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset Enclosure Numbers for MSA 2040

 
Highlighted
Occasional Visitor

Reset Enclosure Numbers for MSA 2040

Hi,

Trying to cut a long story short, I have an MSA P2040 Head Unit that used to have 4 expansion shelves. I'm re-using this elsewhere and adding two completely different expansion shelves we had from elsewhere. Once it was cabled up and powered on, the two expansions got the enclosure numbers 6 and 7 because it's continued on from how it was previously configured. 

Is there a way to reset the enclosure numbers or am I better off factory resetting it?

2 REPLIES 2

Re: Reset Enclosure Numbers for MSA 2040

try to run rescan command

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

**********************************************************************


I work for HPE
Accept or Kudo
Highlighted
HPE Pro

Re: Reset Enclosure Numbers for MSA 2040

Hello,

You can only dreorder the enclosure numbers using the CLI. This is non-disruptive to host IO and can be run at any time the system is fully powered on.

CLI # rescan

Cheers,
Shawn

I work for Hewlett Packard Enterprise. The comments in this post are my own and do not represent an official reply from HPE. No warranty or guarantees of any kind are expressed in my reply.


I work for HPE

Accept or Kudo