SAN (P2000 G3 iSCSI) Vdisk Raid5 offline

[Abdel-aiki]

Hi, 

Here the new situation of my case :

show vdisks
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs Job%
Serial Number Drive Spin Down Spin Down Delay
-------------------------------------------------------------------------------
vd01 9991.8GB 0B A A RAID5 11 0 64k FTOL VRSC 42%
00c0ff12ada20000bb95d25900000000 Disabled 0
-------------------------------------------------------------------------------
Success: Command completed successfully.

How can i take a backup of my data on IT , i can t conncet to the Vdisk with SFTP !

Any Idee please ?

[Shawn_K]

Hello,

In Protocols, do you have the correct settings set for SFTP?

Do you have the host ports connected? You can try a host based backup if you are properly configured.

Cheers,
Shawn

I work for Hewlett Packard Enterprise. The comments in this post are my own and do not represent an official reply from HPE. No warranty or guarantees of any kind are expressed in my reply.

[SUBHAJIT KHANBARMAN_1]

It's good to see that my analysis and recommendation worked and you got back your data.

Now I understand you don't have any professional backup service implemented in your environment which can automatically take data backup. Also I see your actual data not more than 1TB so you can get an external USB HDD which can be of 1TB of size and you can copy your all production data from Host system. Ideally this is pure customer choice how they want to take data backup because this requires planning and cost as well.

I would request you to mark this forum as resolved because your primary issue got resolved.

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************

[TAB_TAB]

Hi,

RAID5

2 X Vdisks

Vdisk01 has two volumes.

I have this same issue starting on monday. After HP P2000 G3 start one disk indicated failure and two others on "LEFETOVER".

As explained by an HP support Team member i deleted the meta data and replaced the failed HDD.

Today i'm unable to add dedicated spare disk and rebuild the vdisks. 

The error message i get is : "Unable to add dedicated spare disk, Vdisk is OFFLINE.

I tried to do the trust command but failed.

I have all my data on this vdisk and i need your help.

Thank you very much.