SANsurfer configuration password

[Davide Depaoli_3]

Hello,
I'm doing some SAN tests in an external lab (not is my lab).
Environment is:
MSA1000
2x FCA2214 HBAs
Linux RH ES 4.0
MPIO for path failover
SANsurfer

My problem is that when I configure HBAs inside SANsurfer, the program ask to me a password to save configuration.
I don't know this password (is it an HBA firmware password, or a SANsurfer ?)
and don't know how to reset the password.

Can anyone help me about this ?
thanks in advance
kind regards
Davide

[Davide Depaoli_3]

Found the information "googleing".
The default SANsurfer password is config

[Ali Merchant]

The password is config. Its used primarily to update the HBA Bios