MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

SANsurfer configuration password

 
Davide Depaoli_3
Valued Contributor

SANsurfer configuration password

Hello,
I'm doing some SAN tests in an external lab (not is my lab).
Environment is:
MSA1000
2x FCA2214 HBAs
Linux RH ES 4.0
MPIO for path failover
SANsurfer

My problem is that when I configure HBAs inside SANsurfer, the program ask to me a password to save configuration.
I don't know this password (is it an HBA firmware password, or a SANsurfer ?)
and don't know how to reset the password.

Can anyone help me about this ?
thanks in advance
kind regards
Davide
2 REPLIES 2
Davide Depaoli_3
Valued Contributor

Re: SANsurfer configuration password

Found the information "googleing".
The default SANsurfer password is config
Ali Merchant
Frequent Advisor

Re: SANsurfer configuration password

The password is config. Its used primarily to update the HBA Bios