There is a problem with a FRU

[Marcus Martin]

I have this error is one of my P2000 G3 Sans and for the life of me I cant find a resolution. Anyone have any insights.

[SUBHAJIT KHANBARMAN_1]

As per the error details it seems Enc 2 IO module A having issue?

How many drive enclosure attached with Controller Enc ?

Did you tried to physically re-seat IO module A of Enc 2 ?

Did you tried to re-seat SAS cables connected to IO module A of Enc 2?

Did you tried to Power Cycle the MSA ?

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

**************************************************************************

[RinuRajan]

A sequential powerycle of the MSA array setup is recommended.
After that run the CLI command: rescan <enter>
This will rebuild/ rescan your backend SAS map.

If the issue persists it would be ideal to log a support case with HPE and have the logs reviewed or IOMs replaced by the HPE Support team for in warranty / contract MSA.