MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade firmware P2000 G3 FC TS201P007 to TS230P008

 
stillwind
Frequent Visitor

Upgrade firmware P2000 G3 FC TS201P007 to TS230P008

Hello,  i can't update firmware on my p2000

 I updated to the TS201P007 firmware, the next update fails, try different firmware, but the result of one.

"The software is not supported for installation on this system.

Below Mentioned Controllercannot be upgraded to the firmware contained in this Smart Component

Please contact Customer Support and Request a warranty Replacement"

-----------------

Current Controller Versions
Component Controller A Controller B
Bundle Version TS201P007 TS201P007
Storage Controller Code Version T201P04 T201P04
Storage Controller Loader Code Version 23.008 23.008
Memory Controller FPGA Code Version F400R02 F400R02
Management Controller Code Version L201R024 L201R024
Management Controller Loader Code Version not set not set
Expander Controller Code Version 1052 1052
CPLD Code Version 13 13

How can I fix this?

 

 

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Upgrade firmware P2000 G3 FC TS201P007 to TS230P008

 

 

Why not try a newer version?

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4209076&swItemId=MTX_1af540c14b3c40beb4089286a5&swEnvOid=4064#tab-history

 

Consider to extract the *.bin file and use SMU or FTP to install, see release notes:

 

ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1485086127/v109841/740672-010.html


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
stillwind
Frequent Visitor

Re: Upgrade firmware P2000 G3 FC TS201P007 to TS230P008

thank you for your reply.
I can't upgrade to TS252R007 or any another

and for TS252R007 :

NOTE: Please upgrade all your arrays to TS250 or latest released firmware version before going with TS252 flashing.

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4209076&swItemId=MTX_1af540c14b3c40beb4089286a5&swEnvOid=4064#tab6

 

Torsten.
Acclaimed Contributor

Re: Upgrade firmware P2000 G3 FC TS201P007 to TS230P008

>> Please upgrade all your arrays to TS250 or latest released firmware version 

 

This is something I don't really understand.

What means "latest released firmware version"?

It is written on the web page, but not in the release notes?

 

There is Version:TS251P006-02 between, however.

 

IIRC I already did this update.

 

 EDIT:

Found another note:

Upgrade all your HP P2000 G3 MSA arrays to TS250 or later firmware version before going with TS252 flashing. For arrays on earlier versions of firmware, upgrade to TS230P008 first and then TS250P002 before upgrading to TS252R007.

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04740958&sp4ts.oid=3687138

 

 

So try to install the binary file *.bin via FTP or SMU.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!