MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Volume mapping issue?

 
Blixl
Occasional Visitor

Volume mapping issue?

Hi!
I have a strange case regarding access mappings to LUNs. If I specify lets say 2 hosts and set All other hosts to none access, the LUN number does not show in the LUN information page. In the overview for the volume it shows LUN None. If I select the LUN I can see the hosts I specified having the LUN number specified. Is this behavior normal? Does it mean that I have to exclude every host that should not have access to the LUN if I allow all other hosts have access?
This happens on a MSA 2012fc dual controller system.
4 REPLIES 4
Uwe Zessin
Honored Contributor

Re: Volume mapping issue?

Can you create some screenshots please?

(simple .JPG or .PNG stored in a .ZIP file and attached to the respones -- no .DOC, please) - thanks.
.
Blixl
Occasional Visitor

Re: Volume mapping issue?

Here's the screenshots attached
skt_skt
Honored Contributor

Re: Volume mapping issue?

Dont you have zoning or Access Logic configured?
Blixl
Occasional Visitor

Re: Volume mapping issue?

Hi!
Zonig is configured