MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Web Access to Storageworks Sanswitch 4/8 - 4/16 Java Problem

 
Robert Klarmann
Occasional Advisor

Web Access to Storageworks Sanswitch 4/8 - 4/16 Java Problem

Hello,

 

I can not access the web interface of the san switches. The switches run with FW 6.2.2f

When I access the web interface - the Java application initialize and then a security prompt from JAVA comes up with with "Failed to validate certificate. The application will not be executed."

 


I tried following workaround I found on the net - none of them worked for me:

 

Reducing security in Java control panel

added the website of the switch to the Execption Site List

modified the java.security file in java/lib/security for not disabling MD2 algorithm and reduced RSA key size to 256

 

But no luck - with Windows 8.1 and Java no way

I could setup an Windows 2003 with an old Java version - but I think just for manageing some fiber switches this is a bit an overkill.

 

Anyone here who knows a solution?

 

Best regards

Robert 

Was the post useful? Clik on the white KUDOS! Star.
Thank You!
__________________________________________
•Say thanks by clicking the "Kudos! Star" which is on the left.

•Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
2 REPLIES 2
Jameo
Advisor

Re: Web Access to Storageworks Sanswitch 4/8 - 4/16 Java Problem

What started the issue? any switch firmware upgrae or Java or IE upgrade?

Robert Klarmann
Occasional Advisor

Re: Web Access to Storageworks Sanswitch 4/8 - 4/16 Java Problem

new computer with windows 8.1 enterprise with all the recent updates and also because of security reasons recent java versions

Was the post useful? Clik on the white KUDOS! Star.
Thank You!
__________________________________________
•Say thanks by clicking the "Kudos! Star" which is on the left.

•Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.