MSA Storage
1748081 Members
5352 Online
108758 Solutions
New Discussion юеВ

Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

 

Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

Hello,
 
Situation was  a fabric with 2 switches (Brocade BladeSystem 4/24 SAN Switch) with FOS v6.1.0g. After upgrading one switch to version 6.2.2f and opening Zone Admin on that switch I can only select ports from the that switch. If I open Zone Admin for the second time I get error "Cannot load information from Fabric, the web server on the switch might be down, try later or refresh". On the switch with older firmware nothing has changed. 
Any ideas?
 
Thanks,
Maarten.
 
2 REPLIES 2
nightwatchman
Occasional Advisor

Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

Hi Maarten,

 

              Can you run supportshow and paste the logs here?

 

 

jitter77
Frequent Visitor

Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

Hello Maarten,

At the later release of Brocade FOS, Brocade split the hardware management and Software management from webtools, such as zone changes...FC Routing, you will need to setup via DCFM or BNA or CLIs; we can only perform hardware level maintenance activities from Webtools.

I work for HP.

________________________________________________
// Brocade certified BCFA, BCFP, BCSD, BCSM, BCFD, BCAF