MSA Storage

Windows 2008 cluster using MSA2012sa

 
Judit Monk
New Member

Windows 2008 cluster using MSA2012sa

I want to setup a two-node active/passive Windows 2008 cluster. Both nodes are attached to the MSA2012sa (dual controller) according HP recommendation: two servers/two HBAs per server/dual path. I created the cluster on the first node: all MSA volumes are clustered disks. When I try bringing up the second node in order to join it to the existing cluster, the node hangs with the Windows 2008 screen.
Any advice or suggestion is greatly appreciated.