MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Windows wants HSV200 Drivers??

 
Duncan Boucher
Occasional Contributor

Windows wants HSV200 Drivers??

I know there is no such thing...and have even fixed this issue in the past..but for the life of me I can not remember the file name or description of the file that disables Windows from finding the HSV's as "new Hardware" at every re-boot.

Can someone please send me a link or search criteria to get this elusive file?

Thanks,
Duncan
2 REPLIES 2

Re: Windows wants HSV200 Drivers??

Sounds like you are missing the HBA driver/update component.
Go to http://hp.com/go/san -> "Fibre Channel Host Bus Adapters"
Click on the desired HBA for the ProLiants. If not there, check under the "Retired products" link.
Then, click on "Software & drivers" -> "Download drivers and software", select your model, select your version of Windows. Pick the latest Driver component, choosing whether you want/need SCSIport or the Storport driver.
Download, run, reboot.

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Highlighted
Dan Kobus
Occasional Advisor

Re: Windows wants HSV200 Drivers??

If you dont have HP HBA's you can perfrom the following;

download the HP driver associated with the HBA

extract the drivers to a folder

in Device Manager update the drivers for the HSV200 pointing to the folder you extracted the HBA drivers too