MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

building a basic san

 
Chris_540
Occasional Visitor

building a basic san

I'm new to SANs and I'm looking into an entry level SAN via the MSA1000. Can someone tell me the basics on how it would, first, tie into a two server cluser, and second, allow additional nodes into the cluser, or third, allow single servers to attach to it. I'm interested in how the HBAs connect to the switch in both a secure and non-secure manner. Also, is the Secure Path software a must ... do I HAVE to use this software in order for the failovers to work on the MSA1000?

Much thanks in advance!!!
1 REPLY 1
meloni
Honored Contributor

Re: building a basic san

here is some good info gor MSA1000 clustered

http://h18004.www1.hp.com/solutions/enterprise/highavailability/whitepapers/ms-msa1000.html
---------------X-------------------X--------------------X----------------X--------------
If everything is under control, you are going too slow (Mario Andretti)