Hi,
I have a HP Proliant 380 G3 server (RedHat As 2.1 2.4.9-e.38enterprise) attached to HP MSA1000.
I experience a serious issue to install the Qlogic HP drivers to provide the failover.
I launched the following commands from the CD HPMSA-755B.iso:
-./INSTALL -f
All are OK, but I receive this message :
The compilation did not suceed
-./INSTALL -s
I receive those error messages:
qla_inioct.c: In function `qla2x00_set_nvram_protection':
qla_inioct.c:502: parse error before `wait_cnt'
qla_inioct.c:536: `wait_cnt' undeclared (first use in this function)
qla_inioct.c:536: (Each undeclared identifier is reported only once
qla_inioct.c:536: for each function it appears in.)
In file included from qla2200.c:78:
qla2x00.c: In function `qla2x00_pci_config':
qla2x00.c:8700: parse error before `int'
qla2x00.c:8714: `pcix_cmd_reg' undeclared (first use in this function)
qla2x00.c:8729: `pcie_dctl_reg' undeclared (first use in this function)
In file included from qla2x00.c:17489,
from qla2200.c:78:
qla_gs.c: In function `qla2x00_fdmi_setup_rpainfo':
qla_gs.c:1235: parse error before `*'
qla_gs.c:1237: `icb' undeclared (first use in this function)
qla2200.c: At top level:
qla_devtbl.h:78: warning: `qla2x00_model_desc' defined but not used
make: *** Error 1
error: Bad exit status from /var/tmp/rpm-tmp.16017 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.16017 (%build)
How can I fix this issue? I need to keep my RedHat 2.1 AS, can you suggest me which drivers can I install??
Thanks,
Haydar
