cannot install the Qlogic HP drivers

[Haydar Haydar]

Hi,

I have a HP Proliant 380 G3 server (RedHat As 2.1 2.4.9-e.38enterprise) attached to HP MSA1000.
I experience a serious issue to install the Qlogic HP drivers to provide the failover.
I launched the following commands from the CD HPMSA-755B.iso:
-./INSTALL -f
All are OK, but I receive this message :
The compilation did not suceed

-./INSTALL -s
I receive those error messages:
qla_inioct.c: In function `qla2x00_set_nvram_protection':
qla_inioct.c:502: parse error before `wait_cnt'
qla_inioct.c:536: `wait_cnt' undeclared (first use in this function)
qla_inioct.c:536: (Each undeclared identifier is reported only once
qla_inioct.c:536: for each function it appears in.)
In file included from qla2200.c:78:
qla2x00.c: In function `qla2x00_pci_config':
qla2x00.c:8700: parse error before `int'
qla2x00.c:8714: `pcix_cmd_reg' undeclared (first use in this function)
qla2x00.c:8729: `pcie_dctl_reg' undeclared (first use in this function)
In file included from qla2x00.c:17489,
from qla2200.c:78:
qla_gs.c: In function `qla2x00_fdmi_setup_rpainfo':
qla_gs.c:1235: parse error before `*'
qla_gs.c:1237: `icb' undeclared (first use in this function)
qla2200.c: At top level:
qla_devtbl.h:78: warning: `qla2x00_model_desc' defined but not used
make: *** Error 1
error: Bad exit status from /var/tmp/rpm-tmp.16017 (%build)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.16017 (%build)


How can I fix this issue? I need to keep my RedHat 2.1 AS, can you suggest me which drivers can I install??

Thanks,

Haydar

[Patrick Terlisten]

Hello,

please check if AS 2.1 is supported the driver. You can try the drivers from QLogic, too.

Regards,
Patrick

[Jose Chavarria]

Hi,

Which is the model number of the HBA you have? The drivers available are mostly for Red Hat Enterprise Linux, but with the model of the HBA you'll be able to narrow it down.

Main website for HBAs:

http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

Jose