MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

configurating P2000 G3 MSA for HP-UX 11.31

 
Timothy P. Jackson
Valued Contributor

configurating P2000 G3 MSA for HP-UX 11.31

Hello everyone,

 

I have a new P2000 G3 MSA and i am connecting it through FC to a HP rs7640 running HP-UX 11.31.

 

Althought I have setup other smaller and much older MSA's I don't even know where to begin with this one. I have no manual for it and don't know what happened to them during shipping.

 

Could some one point me to where I could find the manual or maybe a starting point so I could get this configured?

 

Any help would be greatly appreciated!

 

Tim

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: configurating P2000 G3 MSA for HP-UX 11.31

Manuals are here: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12169&prodSeriesId=4118559

 

 

Short version:

create a vdisk

create a volume

configure the host entry for hp-ux profile

present the volume to the host(s)


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Timothy P. Jackson
Valued Contributor

Re: configurating P2000 G3 MSA for HP-UX 11.31

now for the really dumb question. does this have to be done using CLI or is there an interface in HPUX like saconfig or cvui that I can do this from?

Torsten.
Acclaimed Contributor

Re: configurating P2000 G3 MSA for HP-UX 11.31

All actions will be done directly on the array. There is a CLI and a web-frontend. I prefer the cli.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
axshah
Occasional Contributor

Re: configurating P2000 G3 MSA for HP-UX 11.31

plz post step by step procedure or snapshot to create below things.

 

create a vdisk

create a volume

configure the host entry for hp-ux profile

present the volume to the host(s)

Torsten.
Acclaimed Contributor

Re: configurating P2000 G3 MSA for HP-UX 11.31

Did you see the link to the manuals above?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!