MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

duplicated volume in server 2003 with Msa 2012 and sc08ge

 
SOLVED
Go to solution
Highlighted
Yacine77
Occasional Visitor

duplicated volume in server 2003 with Msa 2012 and sc08ge

Hi,

I have a HP MSA2012sa dual controller storage and a dual-port Host Bus Adapter (HP SC08Ge). Each of my HBA ports is connected with one port of each controller. When i map one volumes from the storage to the server i can see this volume twice in the disk management console.
and i should see only one disk
i don't know what i miss in the configuration
can som body help :)

regards

yacine77
2 REPLIES 2
Robert Badar
Valued Contributor
Solution

Re: duplicated volume in server 2003 with Msa 2012 and sc08ge

Hi Yacine77,

in the disk management console you can see disk volume twice because of you have a two independent paths to this volume. You have to install MPIO SW to unique paths, then everything could be OK.

RB
Yacine77
Occasional Visitor

Re: duplicated volume in server 2003 with Msa 2012 and sc08ge

Thank s RB for the help problem solved