edge switch 2/12

[TOBY WENZEL]

I've configured HP/Brocade's before, but not the McData's. I have a 2/12 that I've configured with only 2 devices, in a zone together, but they don't talk. Am I missing something? The configuration doesn't seem too difficult, but I must be missing something.

[Sheldon Smith]

Not sure I understand your question. Are you trying to merge B-Series (Brocade) and M-Series (McData) switches into a single fabric?

If so, you will want to read "HP StorageWorks Fabric Interoperability: Merging Fabrics Based on M-Series and B-Series Fibre Channel Switches Application Notes (AA-RUQQG-TE, December 2006)"
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=406734&targetPage=http%3A%2F%2Fh20000.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00758729%2Fc00758729.pdf

[TOBY WENZEL]

The McData is in a standalone configuration, I was just mentioning that I have experience with the Brocades. Alas, I have performed 3 firmware updates on the McData (it's been sitting around unused for a year) and the devices are talking to each other. I really think it was just a reboot of the server that did the trick though. Thanks for the response.