HPE Community
MSA Storage
1753830 Members
9056 Online
108806 Solutions
New Discussion

Re: how make san storage emtpy

 
SOLVED
Go to solution
rezabruce1988
Advisor

‎11-22-2018 03:54 AM

‎11-22-2018 03:54 AM

Re: how make san storage emtpy

what differ  between restore default factory and local-only and prompt?

0 Kudos
Reply
SUBHAJIT KHANBARMAN_1
HPE Pro

‎11-22-2018 04:03 AM - edited ‎05-15-2021 12:39 AM

‎11-22-2018 04:03 AM - edited ‎05-15-2021 12:39 AM

Re: how make san storage emtpy

Please refer the P2000 Command Line Reference (CLI) guide which I have shared earlier and look for section "Settings changed by restore defaults" - this will give you idea about what all will get change in normal restore defaults or local only 

 

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************


I work for HPE
Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.