MSA Storage

hp p2000 san storage

 
ahmedzaghloul
Visitor

hp p2000 san storage

 I get a hp p2000 san storage and now i can't access its interface management .. i tried to connect it to an layer 1 switch and then connect my laptop to the switch .. then tried to pint to 10.0.0.2 or 10.0.0.3 but no respond .. Can you help me how can i access it 

1 REPLY 1

Re: hp p2000 san storage

@ahmedzaghloul 

Try to use Serial cable and access the P2000 box. Please find the link which you guide you with Serial cable details,

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00047337en_us

ALternatively you try below steps,

"connect Ethernet cable to your Laptop
and configure your Laptop IP as 192.168.0.2
then start a command prompt
and send a broadcast ping 192.168.0.255
see the response
if you get any IP address apart from 192.168.0.2 then it's the controller IP

otherwise better you ping full broadcast IP
ping 255.255.255.255
if you don't know the subnet"

Also you can refer below link,

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c05087014

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*********************************************************************


I work for HPE
Accept or Kudo