MSA Storage

iSCSI target on HP Storageworks

New Member

iSCSI target on HP Storageworks



I am using a HP Storageworks X1600 with six 2Tb hard disks configured in RAID5.

All the available storage has been already allocated to five logical volumes formatted in NTFS format.

Since these volumes contains data, is it possibile to add an iSCSI target without removing the volumes? In other words, I would like to take an amount of the free space available on the existing volumes in order to use it for an iSCSI target without loosing any data.

If it is feasible, how can I do it with HP Automated Storage Manager?


Thank you in advance for your support.