1748264 Members
3952 Online
108760 Solutions
New Discussion

iSCSI

 
Vinkie
New Member

iSCSI

Hi, We have the following config:

 

2 x DL380p Servers connected to a P2000 G3 iSCSI Dual Controller Model Number – FCLSE-0801. Hyper-V 2012 in use.

 

The customer connected these devices together, but I doubt that it was done according to HP best practises e.g. the devices are connected to the hosts via a public switch. Our problem is that even with a graceful shutdown of all the devices we are still getting corrupt file systems when powering up all devices.

 

I am not an iSCSI expert but I need a guide on how to connect these together, please? (Noddy, expert, anything)