MSA Storage

msa 1000 / sanbox 3050 interop

Weiyi Yang
New Member

msa 1000 / sanbox 3050 interop


I tried to connect a msa 1000 with msa 2/8 san switch to a qlogic sanbox 3050. It failed.

From the msa side, it has the following event:
FABRIC-SEGMENTED port 1, Invald Flow Control Mode.

From the sanbox side, I see the following events:
1004.0035 Failed to connect to a switch due to incompatibility - check interop settings.
1004.0008 Eport Isolating due to ELP Incompatibility.

Google could not help me this time. Any suggestions, links to documents are welcome. Thanks a lot!