cancel
Showing results for 
Search instead for 
Did you mean: 

msa1000 setup

 
ian shanks
Occasional Visitor

msa1000 setup

I have setup my msa1000. From the one server that has the hba installed i can see the controller and have configured two logical drives from the array.
How do i see the volumes from the server that it is attached to.
When i try to run san surfer express it says that the san is not attached, but i have configured it using the acu

any ideas ?
3 REPLIES 3
BR894765
Valued Contributor

Re: msa1000 setup

What HBA do you use?
SANSurfer express is only for QLogic-based HBAs (such as FCA2214).
Javier Perez Losada
Occasional Contributor

Re: msa1000 setup

Disk Adminisrator, initilize and Create Primary or extended partition, Format and use.

JPL
ian shanks
Occasional Visitor

Re: msa1000 setup

I am using the q200 hba which come in the starter kit.

when i open disk administrator the san drive is not there , although i can see the logical drives within the acu.