msa1500

[Pete C]

Hi Ihave an issue with an MSA1500 and MSA30 enclosure..I have an MSA1500 with 4 AA988A scsi modules and 2 dual bus MSA 30s....the problem is that when I use the CLI  session from the MSA1500 it shows duplicated disk numbers ..the dupluicated disks show the same box/slot number but different SCSI busses..can anyone shed any light on what could be happenning please?  Thanks

[Cali]

If you have Dual Ported SCSI Disks connected Dual Portet, every Disk have 2 connections to the Controller.

One connection from SCSI Bus 1 and one from SCSI Bus 2, that's the result of redundant Dual Portet Cabling.

So it's OK.

[ASHOKA_Shankar]

It appears to be cabling issue       
Please refer to the manual to ensure the SCSI cabling is as per the recommendation given on page number :42
      
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01298857-1.pdf              

[Pete C]

That doesn't match the setup I have......I have 4 I/O cards in the MSA1500 and 2 dual bus MSA 30s..Is there a specific cable setup for this?