MSA Storage
1747997 Members
4577 Online
108756 Solutions
New Discussion юеВ

Re: msa2012i on windows 2003 and 2008

 
sergio_57
Occasional Contributor

msa2012i on windows 2003 and 2008

i have two server with windows 2003 x64 R2 sp2
i have msa2012i with two controller
on windows 2003 i have installed MS Initiator "Initiator-2.08-build3825-x64fre.exe" with MPIO
i have connected to nic with the four IP on msa2012i but on "Computer Management" i have two "HP MSA2012i SCSI Enclosure Device" with question mark for driver missing
How driver i necessity ???

on windows 2008 ent. sp2 on one server in "Computer Management" i have mount link for 4 LUN correct (and format correct) but on other server i have 8 disk "offline" instead of only 4 disk as on first server
Why ??
2 REPLIES 2
Uwe Zessin
Honored Contributor

Re: msa2012i on windows 2003 and 2008

> How driver i necessity ???

This is not in the MSA2000i download section, but it sounds like you need it:
- HP MSA 2000 SES Driver

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3687115&prodNameId=3687119&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=co-58815-1


> Why ??

Windows 2008 requires special treatment:

c01564879 - HP StorageWorks MSA2012fc and MSA2212fc - Requires Further Configuration of Multipath I/O (MPIO) Feature in Microsoft Windows Server 2008 to Activate Multiple Paths per LUN

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01564879
.
sergio_57
Occasional Contributor

Re: msa2012i on windows 2003 and 2008

Thank you, work correctly