questions about MSL6030,2/16,EVA3000 on solaris

[lovewula]

My customer with a EVA3000,MSL6030 with 1 ultrium 2 driver and FC router,2 HP StorageWorks SAN switch 2/16 connect to a san,there's some trouble in using ,details as follow:
1.MSL6030 with a FC router connect to a san switch,Secure Path install on a sun server with OS solaris 8 for sharing the EVA3000 disks and there are two HBA installed ,another sun server connect to san for sharing MSL6030 with OS solaris 9,driver for FCA 2257p install on these two sun servers
2.All the two sun servers can see and use the EVA3000 disk
3.The sun server with Secure Path installed cann't see MSL6030,but the other one can see and use correctly.
4.I'm sure the cable and all physics connects are ok.

can anyone help,thanks!

[CA817443]

Lovewula,

Have you implemented any kind of zoning on the san switches? Check for both hard & soft zoning.

Spike

[CA1019034]

You might want to check qla2300.conf in /kernel/drv and see if fibre channel tape support is enabled. It would look like this:

# Fibre Channel tape support enable/disable
# 0 = disable, 1 =enable
hba0-fc-tape=1;

Craig

[lovewula_1]

Thanks for your replies.
I'll go to check these on this Saturday for customer's request,and I'll paste the result.