MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

urgent help needed: new to HP blade centre brocade SAN switch,

 
Jizhong Wang
Occasional Visitor

urgent help needed: new to HP blade centre brocade SAN switch,

OK, I am an experienced SAN admin but new to HP blade centre embedded switch. I got locked out from SAN switch and a few other issues, here is the story
1. tried to setup AD authentication. all commands were successful (aaaconfig --add myADserver -conf ldap -d mydomain.company.com; aaaconfig --authspec "ldap;local" -backup; ldapcfg --maprole adm.na.SAN.Administrators admin). but when I logout and tried to log in, nothing worked. I got locked out from the switch.
2. then I went to data centre and tried to use serial port to access console, no command prompt returned. no login script. nothing!
3. on the 2nd switch, I need to set domain ID. so I disabled switch and issue "configure" and replied "yes" to fabric change, however, domain ID did not show up (other regular brocade switches running SANOS 6.x showed)

so, my questions:
a), how to reset SAN switch to factory defaults? and
b), how to change domain ID on embedded brocade switch used in HP BladeSystem c7000 Enclosure G2.

Thanks for your help.
1 REPLY 1
wrobbins2
Occasional Visitor

Re: urgent help needed: new to HP blade centre brocade SAN switch,