MSM760 - Problem with DHCP

[Fredrik Wellner]

Hello,

I have a MSM 760 with MSM410 AP:s, firmware revision 5.4.1.0-01-9131

The clients doesn't get any dhcp leases. The client vlan is routed by a Cisco and the dhcp server is a Windows server. If I connect with a cable to the vlan I get an address. I have set up WPA-PSK on the VSC, the authebntication works.

It seems that there has been an "Allow traffic between wired clients and tunneled wireless clients" in earlier revisions. I can't find this box anywhere in the controller.

I have mirrored the traffic from/to the AP and the feeling I get is that broadcast traffic reaches the network from the client but unicast doesn't.

Any idea why this doesn't work?

Cheers

Fredrik

[Trevor Commulynx]

is the AP offloading Traffic or is it being terminated at the controller?

[Fredrik Wellner]

Hi, Thanks for your answer.

The AP is offloading traffic to the local network. The clients is using the same vlan as the AP:s.

Cheers!

/Fredrik