Messaging
cancel
Showing results for 
Search instead for 
Did you mean: 

cics 4.2 XA problem with oralce 8.1.6 HPUX 11.0

nill_3
Occasional Advisor

cics 4.2 XA problem with oralce 8.1.6 HPUX 11.0

Hi all,

I have setup cics sucessfully with 'cicsterm ' connect OK.

while use IBM provided samples 'uxa1' and ORACLE provided samples 'oraclexa.c' and oraclexa.mk' to compile and setup XA with ORACLE 8.1.6, and cold start up the region,
the 'cicsas' server terminate and hint:
'Exception exc_e_illaddr caught, cics control process cicsas terminated.'


HPUX has installed the patch:
PHSS_27962 HP9000 DCE/9000 1.7 Runtime Cumulative Patches

PHSS_27964 HP9000 DCE/9000 1.7 Server/DevTool Cummulative Patch

PHCO_27731 libc cumulative patches

Some hints about this?
2 REPLIES
Steve Steel
Honored Contributor

Re: cics 4.2 XA problem with oralce 8.1.6 HPUX 11.0

Hi

see

http://www.transarc.ibm.com/Downloads/cics/READPTF_PTF9_hp_en_US.htm

Description:
When CICS connected to a mainframe system via SNA, problems occurred if the SNA session was dropped due to a network error. If CICS attempted to reallocate a session, the exc_e_illaddr exception was thrown and the region terminated.

Solution:
This problem has been resolved.
Description:
An illegal address exception (exc_e_illaddr) caused CICS to terminate abnormally with the code U4419.

Solution:
This problem has been resolved.


Ask IBM

steve Steel
If you want truly to understand something, try to change it. (Kurt Lewin)
nill_3
Occasional Advisor

Re: cics 4.2 XA problem with oralce 8.1.6 HPUX 11.0

Hi Steve,

Unfortunately, I have installed the PTF9 for CICS and PTF16 for Encina, Still the problem!!!

Any other suggestions?

Nill