cancel
Showing results for 
Search instead for 
Did you mean: 

syslog messages

SOLVED
Go to solution
Isaac_4
Frequent Advisor

syslog messages

HI:

i get a error in syslog.log , some body can help me to know wich device send this error.

SCSI: Unexpected Disconnect -- lbolt: 51928391, dev: cd013000, io_id: 114a551



The time is gold
3 REPLIES
nanan
Trusted Contributor

Re: syslog messages

Check SCSI devices with IOSCAN
whether there is UNCLAMED devices

A. Clay Stephenson
Acclaimed Contributor
Solution

Re: syslog messages

The key is decoding the device: the first two hex digits (CD hex = 205 decimal) are the major device number. Do an lsdev and find what device corresponds to 205 (stape?). The next two hex digits (01) are the controler instance number, c1, the next hex digit (3) is the SCSI ID or target (t3), the next hex digit (0) indicate the LUN (d0) and the final hex digits are driver dependent. In any event,
You need to find the tape device (if stape = 205) that matches c1t3d0 so look for /dev/rmt/c1t3d0xxxx and that is your boy.
If it ain't broke, I can fix that.
Ken Grabowski
Respected Contributor

Re: syslog messages

Hi Isaac,

Obviously it is a problem with a SCSI dev. I would suggest you use the ioscan command to find the device with a match dev: value.

If you don't know the class of the device I would suggest starting with "ioscan -fun" and look through the output. If you want to narrow it down a little most SCSI devices are either disk or controllers. you could try "ioscan -funC sctl" or "ioscan -funC disk".