Microsoft System Center Integration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Bladesystem discovery not working in SCOM 2007 R2

markusbo
Occasional Visitor

HP Bladesystem discovery not working in SCOM 2007 R2

Hi!

I have installed the HP Proliant and HP BladeSystem integration installation program from HP version 1.40 that include services and SCOM MPs. The Proliant monitoring work fine but the BladeSystem is not being discovered.

We have added three BladeSystems in HP BladeSystem Enclosure Monitor Manager and they are green and working properly.

 

The HP Bladesystem event log in the RMS server says:

 

Three times we get:

  • Information
  • ID=31
  • Category=SOAP Event
  • Event Information/Event:EVENT_INTERCONNECT_VENDOR_BLOCK

SOAP Event Informational.

Event ID: '39'

Event Information/Event: EVENT_INTERCONNECT_VENDOR_BLOCK

Event Information/Event Time Stamp: 2011-06-15 15:05:11

Event Information/Queue Size: 0

Event Information/Item: 65552

Event Information/Item Element Name: numValue

 

Two times we get:

  • Information
  • ID=31
  • Category=SOAP Event
  • Event Information/Event:EVENT_LCD_STATUS

SOAP Event Informational.

Event ID: '58'

Event Information/Event: EVENT_LCD_STATUS

Event Information/Event Time Stamp: 2011-06-15 15:03:51

Event Information/Queue Size: 0

Event Information/Queue Size Specified: True

Event Information/Item/Status: OP_STATUS_OK

Event Information/Item/Display: UID_ON

Event Information/Item/LCD PIN: False

Event Information/Item/Button Lock: False

Event Information/Item/LCD Setup Health: LCD_SETUP_HEALTH_OK

Event Information/Item/Diagnostic Checks/Internal Data Error: NO_ERROR

Event Information/Item/Diagnostic Checks/Management Processor Error: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Thermal Warning: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Thermal Danger: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/IO Configuration Error: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Device Power Request Error: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Insufficient Cooling: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Device Location Error: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Device Failure: DIAGNOSTIC_CHECK_NOT_PERFORMED

Event Information/Item/Diagnostic Checks/Device Degraded: DIAGNOSTIC_CHECK_NOT_PERFORMED

Event Information/Item/Diagnostic Checks/AC Failure: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/I2C Buses: NOT_RELEVANT

Event Information/Item/Diagnostic Checks/Redundancy: NOT_RELEVANT

Event Information/Item/Extra Data[0]Name: Vga

Event Information/Item/Extra Data[0]Text[0]: 0

Event Information/Item/Extra Data[1]Name: Kvm

Event Information/Item/Extra Data[1]Text[0]: 0

Event Information/Item Element Name: lcdStatus

 

Then we get this once:

  • Information
  • ID=15
  • Category=Monitor
  • Data Collection Started

And this once:

  • Information
  • ID=16
  • Category=Monitor
  • Data Collection Completed

Someone who has any idea what this problem can be? I have installed this integration before and this is the first time I get a problem.