- Community Home
- >
- HPE Community, Taiwan
- >
- 伺服器
- >
- Netserver/Proliant 伺服器
- >
- 回應: DL 360g4出現NIC Agent error msg
Netserver/Proliant 伺服器
1753305
會員
6117
線上
108792
解決方案
論壇
類別
Company
Local Language
返回
論壇
討論平台
返回
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
部落格
信息
社區語言
語言
論壇
部落格
文章選項
- 訂閱此主題的RSS 提要
- 將此主題標記為未讀
- 將主題標記為已讀
- 將主題在本帳號置頂
- 標示為書籤
- 訂閱此主題
- 列印此頁
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 01-07-2006 02:01 PM
在 01-07-2006 02:01 PM
DL 360g4出現NIC Agent error msg
各位前輩先進大家好,目前我手中的dl360g4 and dl380g3安裝的作業系統是win2003srv std 中文版,在它們的事件檢視器\系統\的log中出現一個NIC Agents的error msg.詳細內容如下:
NIC Agent: Connectivity has been lost for the NIC in slot 0, port 1.
請問是何原因造成的?有解嗎?謝謝.
NIC Agent: Connectivity has been lost for the NIC in slot 0, port 1.
請問是何原因造成的?有解嗎?謝謝.
4則回覆 4
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 01-11-2006 03:21 PM
在 01-11-2006 03:21 PM
DL 360g4出現NIC Agent error msg
之前做過什麽動作?加裝過什麽周邊設備?
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 01-11-2006 04:44 PM
在 01-11-2006 04:44 PM
DL 360g4出現NIC Agent error msg
Snmp Trap: cpqNic2ConnectivityLost - 18006 in
CPQNIC.MIB Symptom: "This trap will be sent any
time the status of a logical adapter changes to
the Failed condition. This occurs when the
adapter in a single adapter configuration
fails, or when the last adapter in a redundant
configuration fails. This can be caused by loss
of link due to a cable being removed from the
adapter or the Hub or Switch. Internal adapter,
Hub, or Switch failures can also cause this
condition.
User Action: Check the cables to the
adapter and the Hub or Switch. If no cable
problems are found, the adapter, Hub, or Switch
may need replacement."
先看看是不是網路線鬆脫了. 或是被拔走了.
CPQNIC.MIB Symptom: "This trap will be sent any
time the status of a logical adapter changes to
the Failed condition. This occurs when the
adapter in a single adapter configuration
fails, or when the last adapter in a redundant
configuration fails. This can be caused by loss
of link due to a cable being removed from the
adapter or the Hub or Switch. Internal adapter,
Hub, or Switch failures can also cause this
condition.
User Action: Check the cables to the
adapter and the Hub or Switch. If no cable
problems are found, the adapter, Hub, or Switch
may need replacement."
先看看是不是網路線鬆脫了. 或是被拔走了.
以上表述為作者個人觀點,不代表惠普公司,使用本網站,請遵守網站使用規則和條款
© 版权所有 2024 慧与发展有限责任合伙企业