Netservers

BIOS flash -> "Failure: code 0x202....."

 
SOLVED
Go to solution
diekiller
Occasional Contributor

BIOS flash -> "Failure: code 0x202....."

Hi,

We tried to upgrade the BIOS of our HP lp2000r (<= 1 Ghz) with the latest version 4.06.31RB.
In some cases this resulted in an error and a partially flash. The error "Failure: code 0x202.....".
In a support doc on the site (IS15325) it said that u also needed to flash the TTRCC card to the latest firmware.
So we updated that to B0303 with no errors. Next retried the BIOS update no luck. Still the same error........
1 REPLY 1
Marcin Golembski_1
Honored Contributor
Solution

Re: BIOS flash -> "Failure: code 0x202....."

Maybe it's because you already have a mismatch in firmware/BIOS versions resulting from the earlier unsuccessful flash. Try removing TTRCC from the server, flash the BIOS and install the card back. I think the subsequent flashes should be OK.