E40/E45 Memory Installation

[Abigail Suguitan_1]

I have two old netservers E40 and E45. I removed the memory from both servers and when I installed them back, I'm getting the error:

Non-ECC compatible memory.... which prevents my servers from booting.

Can somebody tell me what to do? Thanks.

[Marino Meloni_1]

hi
the E40 support standard ram, originaly the 200 Mhz E40 ships with 32 MBytes of RAM installed, the 180 Mhz E40 with 16 MBytes of RAM
the E45 come with 32 or 64 MBytes ECC FPM memory
so be sure to not mix or exchange the simms of the servers
bye
marino

[Abigail Suguitan_1]

Thank you... but is there a way for me to identify which RAM to use? Both memories from the E40 and E45 machines have been mixed.

[Marino Meloni_1]

hi
these are part number of the hp ecc memory for these server,
8 SIMM D4890A
16 SIMM D4891A
32 SIMM D4892A
64 SIMM D4290A
these have to be installed on the E45 server, two at a time in pair.
if you have some modules without these number, the probably go on the E40 server.
hope this can help
marino