Netservers
1748124 Members
3249 Online
108758 Solutions
New Discussion юеВ

Re: HP NETSERVER E60 - Microcode missing !!!!!!!!!!!!

 
Petr Zeman
New Member

HP NETSERVER E60 - Microcode missing !!!!!!!!!!!!

Hi,

please, i need help. I upgraded procesors and now when i start server i see this two error message.

0B00-0A: Missing microcode update data block for microprocessor
0B01-0A: Missing microcode update data block for microprocessor

Can you help me? Any solution?


Thank you very much. Bye.
3 REPLIES 3
Greg Carlson
Honored Contributor

Re: HP NETSERVER E60 - Microcode missing !!!!!!!!!!!!

Petr,

You simply need to flash the bios to the latest as the bios handles microde information.

Downloads are located here for the E60
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=18330&taskId=135&prodTypeId=15351&prodSeriesId=45937&submit.y=0&submit.x=0тМй=en&cc=us

Ciao,
Greg
Lets Roll!
Tony Maimer
Valued Contributor

Re: HP NETSERVER E60 - Microcode missing !!!!!!!!!!!!

Hello Petr,

Also, are they processors from HP and are they specifically designed for the E60?

Tony
e4services
Honored Contributor

Re: HP NETSERVER E60 - Microcode missing !!!!!!!!!!!!

That is correct. If the processor is one that was never supplied by HP, then it was never loaded in the BIOS. Even though the system will operate fine, you will have to deal with the error message at POST. Just an annoyance
Hot Swap Hard Drives