BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Netservers
Showing results for 
Search instead for 
Do you mean 

HP Netserver LP1000r

Highlighted
Occasional Visitor

HP Netserver LP1000r

Hello,

 

I have a question about an HP Netserver LP1000r.

Does this server have an integrated RAID controller?

Or must be an PCI board attached on the system?

 

Kind regards,

 

Bergen110

1 REPLY
HPE Pro

Re: HP Netserver LP1000r

[ Edited ]

Hi,

 

 

The LP1000R does not have an integrated RAID controller built into the system board. If you need it, you will have to install a separate SCSI RAID controller into the one available PCI slot.



The NetServer LP 1000r has an embedded dual-channel Ultra 3 Wide PCI SCSI controller. It has 2 Channels. Channel A is used for cabling to the hot swap hard disk cage. Channel B is connected to an external port for external SCSI devices.

 

 

For adding an additional Disk Array Controller (NetRAID), as per the documents available, HP recommends only using the NetRAID “1Si “ (D2140A) PCI board in Netserver lp 1000r

 

Part number: D2140-69004

 

Description: NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector.

 

 

However, the above part is currently not available in production.

 

 

 

****You may also refer below HP document for HP Netserver LP 1000r  FAQ:

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/lpn11481/lpn11481.pdf

 

 

 

 

Helpful links:

 

http://support.citrix.com/servlet/KbServlet/download/609-102-8132/HP_lp1000r_XP_TSE.pdf

http://www.mpcdrivers.com/sylvia/Support/Server/LP1000r/LP1000r%20Service%20Manual.pdf

 

Hope the info will help you :)

 

 

Regards,

Renji

I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....