HPE Community
Netservers
1753916 Members
8045 Online
108810 Solutions
New Discussion юеВ

Re: LXr Pro - Gigabit Adapter

 
Anton Neubert
New Member

тАО11-16-2002 02:51 AM

тАО11-16-2002 02:51 AM

LXr Pro - Gigabit Adapter

Hi,

does anyone has an idea, if the lxr pro works with an gigabit ethernet adapter (f.e. 3c996-t) ?
Regards

Toni
0 Kudos
2 REPLIES 2
petr jaeger
Honored Contributor

тАО11-16-2002 07:03 AM

тАО11-16-2002 07:03 AM

Re: LXr Pro - Gigabit Adapter

the logic is simple - if your gigabit card is 32 bit, then it should work in the PCI slot. If it is 64 bit, then it could - according to PCI specs.

the lxr PCI bus may get clogged if you have too many so fast devices on it - you'd want to have the PCI card on the same bus as the SCSI card to avoid the data transfer across the PCI bridges

petr
0 Kudos
Terri Harris
Honored Contributor

тАО11-18-2002 02:14 PM

тАО11-18-2002 02:14 PM

Re: LXr Pro - Gigabit Adapter

The NetServer LXr Pro has 32-bit PCI slots, which are PCI spec 2.1. Check the Gigabit card requirements and see if this is adequate.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.